Pavilion Board

Pavilion » Products » Pavilion Board

The Pavilion Board baseboard is designed for residential or light commercial applications. The Board combines efficient operation, easy installation and an advanced design for a superior product!

Pavilion Board features:

  • Heavy-gauge, front panel
  • One-piece, seamless end caps
  • Modern, streamlined design with high-luster, white finish
  • Snap-on damper – no hinges which can bind or loosen with age
  • Quiet, trouble-free performance
  • Extra-strength wide brackets; no hanging hooks or wires
  • Many accessory choices to customize installation
Pavilion Board
Model Tube Size Tube/Fin Fins per Ft. Flow Rate Average Hot Water Temperature °F/BTU's
170° 180° 190° 200° 210° 220° 230° 240°
Board 004041 3/4" Copper/Al 60 4 GPM (2000 lbs./Hr.*) 510 580 640 710 770 850 910 970
Board 004041 3/4" Copper/Al 60 1 GPM (500 lbs./Hr.) 480 550 610 670 730 800 860 920
Board 00405 1/2" Copper/Al 60 4 GPM (2000 lbs./Hr.*) 540 600 680 730 790 870 940 1,000
Board 00405 1/2" Copper/Al 60 1 GPM (500 lbs./Hr.) 510 570 640 690 750 820 890 960

1 Ratings are approved under the Latest Edition of the I=B=R Testing and Rating Code for Baseboard Radiation. As allowed by thiscode, 15% has been added for heatingeffect. Ratings are based on active finned length which is 3" less than ordering length. The use of I=B=R approved ratings at 4 G.P.M. is recommended for all normal loop systems, where the water flow rate is equal to 4 G.P.M. When the flow is unknown, the I=B=R approved ratings at 1 G.P.M must beused.

2 I=B=R Ratings are based on active length, which is 4" less than total length, and includes a 15% addition for heating effect.

*Note: The use of I=B=R Ratings at 2000 lb/hr is limited to installations where the water flow rate through the baseboard unitis equal to or greater than 2000 lb/hr. Wherethe flow rate through the baseboard is not known; the rating at 500 lb/hr. must be used.

Bracket: Electro-Galvanized Steel. .048" Nominal Thickness.

End Caps - 3" wide left and right,for use at doorways and wherever a finished end is needed.

Hinged End Caps - 5-1/4" wide left and right. Ideal for semi-recessed installation. Makes removal of front panel easier. Fits flush to the floor. Fully telescopic.

Extension Sets - 7" and 14" wide. Four sections (back, front, top and damper). Telescopes to fill gaps up to 12-1/2" between baseboard panels.

Wall Joiners - 5" and 9". fully telescopic to conceal connecting pipes.

Valve Enclosure - 9" wide left and right. Extra wide 6" hinged door for easy access to valve or vent. Fully telescopic.

Valve Enclosure (Slotted) - 9" wide left and right. Extra wide 6" hinged door for easy access to valve or vent. Fully telescopic.

Inside Corner - 90° and 135°/45°. One piece snap-on for easy installation. Telescopic up to 2-1/2" on each wall.

Outside Corner - 90° and 135°/45° . Use to trim corners at projecting wall. Telescopic up to 1" on each wall.

Splicer Set - 2" wide. Three piece snap-on-top, front and damper joiner. Joins adjacent baseboard panels. Supplied free of charge in 5 ft. to 8 ft. lengths.

Copper Return Bend - Custom designed 180° copper-to-copper return bend installs easily into enclosure, offering supply and return connection from one end of the baseboard. Return bend fits elements.

Tube Support - Provides support for return tube.